warning

you have to make sure that your age is 18 or older, then you can browse this website further. otherwise, please leave and close this page immediately !

News

home |News |

Mysmok ISMOD NANO review from Heat180.com

latest news

latest news

Mysmok ISMOD NANO review from Heat180.com Mysmok ISMOD NANO review from Heat180.com

NANO, a Simple, integrated device. There are 4 colors on the device: gold, red, green, black. You could change the top cover because it have a separat

Mysmok ISMOD NANO review from Heat180.com

  • 2021-09-02

NANO, a Simple, integrated device. There are 4 colors on the device: gold, red, green, black. You could change the top cover because it have a separate cap design.

15s of fast preheating time, 300s of enjoyment, allow the consumption of 20 tobacco sticks at a single charge, one-button operation, simple and fun.

Let's see the review from the fans of  the famous heated tobacco Community heat180


UNBOXING



In your Mysmok Ismod Nano kit you will find; the device, the manual, a warranty card, a USB cable, and cleaning sticks.


Before using your device, it’s best to check what percent charge it has. To do this, click the control button once. The color of the light will indicate what percent charge is remaining. Blue means 100%-60% remaining, yellow is 60%-10%, red is 10%-0%. If the light shows anything other than blue we recommend charging. To do so, just connect the device to a power source via the USB cable. Charging takes approximately 1.5 hours.



HOW TO USE


Now that your device is fully charged, you can being using it. Just follow the instructions below;



1.       Insert HeatStick

2.       Press and hold control button to turn on

3.       Device will vibrate and light flashes while heating

4.       Once the heating has started, set temperature by clicking control button 5 times, then once each time you want to change the temperature level – light color will indicate set temperature

o   Green = low temperature

o   White = medium temperature

o   Purple = high temperature

5.       When heating is complete, device will vibrate and light turns solid

6.       30 seconds before the end of the cycle you will get warning vibration and light will begin flashing

7.       When cycle is over, device will vibrate and light turns off

8.       Remove HeatStick by pressing up on HeatStick Eject button

With Ismod Nano you can get 20 consecutive uses before needing to charge again.

You’ll want to clean your device regularly to maintain good device health. Unfortunately, Ismod Nano does not offer automatic-cleaning, so to clean just remove the cap and use the cleaning sticks to wipe away any grime inside the HeatSticks heating chamber. We recommend doing this at least once per week.


HEATSTICKS OVERVIEW

The Mysmok brand does not product their own HeatSticks. Instead, their devices are designed to work with other branded HeatSticks, such as HEETS and Marlboro for IQOS HeatSticks.



MANUAL

Mysmok Ismod Nano Manual PDF Download




friendly links :

Online Shop

copyright © 2021 Mysmok Electronic Technology Co., Ltd.all rights reserved.

#

   

the professional team to service !

chat now

live chat

    If you have questions or suggestions,please leave us a message,we will reply you as soon as we can!